Filter
Top Products
68
Modem
CAUTION
z Do not use the PBX internal phone lines installed in company offices. Doing so may
lead to a fire or electric shock.
z It is not possible to connect the modem to any of the following lines.
• Internal home phones
• Intercoms
z Be sure to connect the modem telephone cable into the modem port, not into the LAN
port.
z The modem may be damaged by sudden high voltage surges, as may occur in the
event of a lightning strike. We recommend use of a surge protector.
1 Connect the computer and the telephone jack (A) using a modem
telephone cable (included:B).
Open the modem cover, position the cable so that the tab (C) matches the port ( ),
and insert the cable until you hear a "click".
2 Change the settings as necessary.
A Select [Edit] in [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] - [Dialing Rules], then select the location from
which you will be dialing in [Country/region].
B Input the necessary information (items such as the area code, dialing rules,
etc.), select [OK], then select [OK].
NOTE
z Do not enter either the standby or hibernation mode during communications.
z To remove the cable, pull out while pressing down on the tab.
Connecting the Internal Modem with a Telephone Jack