Panasonic DMC-SZ5 Webcam User Manual


 
- 112 -
Wi-Fi
To send the location information of your smartphone to this unit
1 Connect this unit and the smartphone. (P109)
2 Select [Time sync] on the smartphone.
Adjust the clock setting of this unit to that of the smartphone. The process may take several
tens of seconds.
3 Turn on [Rec. loc. Info] on the smartphone.
End [Remote Control] by pressing [ ].
4 Take a picture on this unit.
To correctly record the location information onto pictures, perform the following operations
before shooting:
Set the time and date of the smartphone same as those of this unit.
If the smartphone’s [Rec. loc. Info] is turned on.
Bring the smartphone to a close proximity of the camera.
5 Connect this unit and the smartphone. (P109)
6 Select [Send location data] on the smartphone.
The smartphone sends the acquired location information to the card in this unit.
When the transfer of location information to the card in this unit is complete, the confirmation
screen is displayed on the smartphone. Select whether to delete location information from the
smartphone.
Refer to P92 to record the location information on the pictures taken by this unit.
Note
If you have changed the clock setting of this unit or the smartphone after [Time sync], perform
[Time sync] again.
On the smartphone, you can set the acquisition interval of location information and check the
transfer status of location information. Refer to [Help] in the “LUMIX LINK” menu for details.
The smartphone may fail to acquire location information in China and the border area in the
neighbouring countries of China. (As of August 2012)