Panasonic DMC-SZ5 Webcam User Manual


 
- 121 -
Wi-Fi
To print pictures wirelessly
The Wi-Fi connection setup screen is displayed if you have not done the Wi-Fi setup yet.
Follow the on-screen instruction to configure.
See the following website for information on the PictBridge (wireless LAN-compatible)
printer.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Select [Wireless Print] in the [Wi-Fi] menu. (P41)
If you have already set the connection destination, the confirmation screen is displayed. Select [Yes].
Press [ ] to quit [Wireless Print].
To print a single picture
Refer to “Selecting a single picture and printing it” on P148 for details.
To print multiple pictures
Refer to “Selecting multiple pictures and printing them” on P148 for details.
To change the connection destination
1 Press [DISP.] on the destination confirmation screen.
2 Press 3/4 to select the item, and press [MENU/SET].
To change the wireless access point
1 Press [DISP.] on the destination confirmation screen.
2 Press 3/4 to select [Change Access Point], and press [MENU/SET].
3 Press 3/4 to select a name of registered wireless access point or [New Access
Point], and press [MENU/SET].
When you select [New Access Point], a new access point will be registered to this unit.
Note
Motion pictures cannot be printed out.