Filter
Top Products
- 161 -
Others
[No image to send]
•
This is displayed when there is no image to transmit due to the restriction of the destination. Check
the file type of the image to transmit. (P113)
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
•
Radio waves from the wireless access point are getting weak. Perform the connection closer to the
wireless access point.
•There is no reply from the server or it has exceeded the communication processing time. Try again
after a while.
•Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.
[Upload to the Cloud Folder is available, after Cloud Sync setting has been done on
downloadable devices such as PC or smartphone.]
•
Devices that download images from a cloud folder are not registered.
•Perform Cloud Sync setting. Configure the settings on a PC with PHOTOfunSTUDIO or on a
smartphone with “LUMIX LINK”. Refer to P115 for details on [Cloud Sync. Service].
[Connection failed]
•
Check following regarding the smartphones you intend to connect.
> The smartphone does not operate.
> Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
> There is no free storage space on the smartphone.
[Login failed. Please check Login ID and Password]
•
Login ID or password for the “LUMIX CLUB” is not correct. Please enter it again. If you have forgotten the
login ID or the password, there is information in the login screen of the “LUMIX CLUB” website.
[Some files cannot be sent because of destination limit]/[Transfer completed. Some
files are left because of destination limit.]
•
Check the file format of the image to send.
•Sending motion pictures may fail if the file size is too large. Split the motion picture using [Video
Divide]. (P97)
[Unavailable. Please set Login settings on LUMIX CLUB web site.]
•
Login to the “LUMIX CLUB” from your smartphone or PC, and set the login details of the destination
WEB service.
[Both picture and video sharing service cannot be selected together]
•
WEB services designed only for pictures, and WEB services designed only for motion pictures
cannot be selected at the same time. Deselect one of the services.
[Cannot get IP address. Please set wireless AP’s IP address setting to DHCP.]
•
Turn on DHCP settings of the IP address of the connected wireless access points.
[Cannot connect to server]
•
If a message is displaying asking to update the route certificate, agree to update the route
certificate.