50
Setting the message transfer/pager call
1
Press .
2
For common message transfer,
press , then .
For mailbox 1 message transfer,
press , then .
For mailbox 2 message transfer,
press , then .
For mailbox 3 message transfer,
press , then .
3
Press .
4
Press or to select the desired setting.
MESSAGE: Transfers incoming messages.
PAGER: Calls your pager.
OFF: Turns off this feature.
5
Press .
6
a: If you selected “MESSAGE” in step 4:
Enter the telephone number where the
message is to be transferred.
b: If you selected “PAGER” in step 4:
Enter your pager phone number.
● If this feature does not work properly, press
more than one time at the
end of your pager phone number to extend the
paging time.
If you wish to display a message on your
pager, enter the message after your pager
phone number and .
Programming methods may vary depending on
the pager company. Contact your pager
company for details.
● You may enter a total of 46 digits and/or
pauses.
7
Press .
8
Press .
Note:
● This feature can be turned on/off remotely
from a touch tone phone (see page 55).
Transferring incoming call messages (cont.)
Display:
