Filter
Top Products
60
Changing the logo print position
The logo, telephone number, date, time and page number can be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document’s paper size (pre-selected setting).
IN: Inside of the transmitted document’s paper size.
1
Press .
MENU
2
Press , then .
2 1
3
Press .
START/COPY/SET
4
Press or to select the desired setting.
5
Press .
START/COPY/SET
6
Press .
MENU
2 3
4 5 6
7 8 9
0
1
MENU
Dial keypad
START/COPY/SET
SYSTEM SET UP
LOGO POSITION
MODE=OUT
Display:
1
Press .
MENU
2
Press , then .
2 3
3
Press .
START/COPY/SET
4
Press or to select “ON”.
●
If this feature is not required, select “OFF”.
5
Press .
START/COPY/SET
6
Press .
MENU
OVERSEAS MODE
Note:
●
After transmission, this feature will be turned
off automatically.
You may experience difficulty in transmitting documents overseas. This feature will make sending documents
easier as the transmission speed is slowed down. Before starting the transmission procedure, follow the steps
below.
Sending documents overseas
2 3
4 5 6
7 8 9
0
1
MENU
Dial keypad
START/COPY/SET
SYSTEM SET UP
MODE=ON
MODE=OFF
Display: