Filter
Top Products
54
All messages have been erased.
The message has been erased.
■ Repeating a message
Press to play the current message.
—If you press within 5 seconds of playback, the previous message will be played.
■ Skipping a message
Press to play back the next message.
Note:
● If you hear the voice guide after playing back the
messages, memory is full. Erase some or all of the
messages.
2
1
1
Not enough recording time. Please erase
unnecessary messages.
Example of the voice guide:
Example of the voice guide:
During playback
Erasing incoming messages from memory
Example of the voice guide:
Other remote operations
■ Monitoring the room sound
You can monitor the sound in the room where the unit is installed.
Press during the remote operation.
—You can monitor the room sound for about 30 seconds.
Note:
● After 30 seconds, a beep sounds. To continue monitoring, press again within 10 seconds.
6
6
■ Erasing a specific message from memory
Press when the message you want to erase
is played.
—A long beep and the voice guide will be played.
Then the unit will continue with the next message.
■ Erasing all messages from a specific memory
You can erase all of the recorded messages from the common memory and each mailbox memory.
To erase all of the messages in a mailbox, you must first select the mailbox.
Press when you want to erase the messages
in a specific memory.
—A long beep and the voice guide will be heard.
5
4
Operating the answering device from a remote
phone
(cont.)