Filter
Top Products
2. Preparation
21
For assistance, please visit http://www.panasonic.com/help
2.4 Adjusting volume
Ringer volume
While the unit is idle, press {A} or {B}.
L If any documents are in the document entrance, you
cannot adjust the volume. Confirm that there are no
documents in the entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display “RINGER OFF=
OK?”.
2. Press {Set}.
L When a call is received, the unit will not ring and
will display “INCOMING CALL”.
L To turn the ringer back ON, press {A}.
Ringer type
L You can select one of three ringer types (feature #17
on page 42).
Handset receiver volume
While using the handset, press {A} or {B}.
Monitor volume
While using the monitor, press {A} or {B}.
Initial Programming
2.5 Date and time
You must set the date and time.
1 Press {Menu}.
SYSTEM SETUP
PRESS [()]
2 Press {#}, then {0}{1}.
SET DATE & TIME
PRESS SET
3 Press {Set}.
L The cursor (|) will appear on the display.
M:|01/D:01/Y:10
TIME: 12:00AM
4 Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2010
Press {0}{8} {0}{3} {1}{0}.
M:08/D:03/Y:10
TIME: |12:00AM
5 Enter the current hour/minute by selecting 2 digits for
each. Press {*} repeatedly to select “AM” or “PM”.
Example: 3:15PM (12 hour clock entry)
1. Press {0}{3} {1}{5}.
M:|08/D:03/Y:10
TIME: 03:15AM
2. Press {*} repeatedly to display “PM”.
M:|08/D:03/Y:10
TIME: 03:15PM
6 Press {Set}.
SETUP ITEM [ ]
7 Press {Menu} to exit.
{A}{B}{Set}
{Set}
{<}{>}
{Menu}
FL421-PNQX3022ZA-OI-en.book Page 21 Thursday, July 29, 2010 9:35 AM