Filter
Top Products
1. Introduction and Installation
18
5 Insert the standard input tray into the unit, lifting the
front part of the tray. Then push it completely into the
unit.
Note:
L If the paper is not loaded correctly, re-adjust the
paper guides, or the paper may jam.
L If the standard input tray does not close, the plate in
the standard input tray may not be in the locked
position. Push the paper down and make sure that
the paper is lying flat in the standard input tray.
Caution for the standard input tray
L Do not drop the standard input tray.
L Hold the standard input tray with both hands
when removing or installing. The standard input
tray weighs approximately 4.8 kg when fully
loaded with recording paper.
Do not touch the plate (9) on the left side of the
standard input tray.
Approx. 4.8 kg
9