Filter
Top Products
11. Help
90
“Polling Error” L The other party’s fax machine does not offer the polling function. Check with
the other party.
“Redial Time Out” L The other party’s fax machine is busy or has run out of recording paper. Try
again.
“Remove Document” L The document is jammed. Remove the jammed document (page 106).
L Attempted to send or copy a document longer than 600 mm of 1-sided
document / 360 mm of 2-sided document using the automatic document
feeder. Press {Stop} to remove the document. Divide the document into
two or more sheets and try again.
“Replace Drum” L The drum cartridge’s service life is finished. Replace the drum cartridge
immediately.
“RX Memory Full” L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 16) or remove the jammed
paper (page 100).
L If the PC fax setting (feature #442 on page 70) is set to “Always”,
– check the connection between the computer and the unit.
– check that the computer is turned ON.
L If the fax preview mode (feature #448 on page 56) is set to “On”,
– view, print or save the received fax documents (page 52, 53, 56), and
then erase the unnecessary documents (page 53).
– turn the setting to “Off”. The fax documents stored in memory will be
printed automatically.
– set feature #449 (page 71) to “On”, and then print the received fax
documents (page 53).
“Scanner Position Error” L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
“Transmit Error” L A transmission error occurred. Try again.
“Tray #2 Left Cover
Open”
L The left cover of the lower input tray is open (page 85). Close it.
“Warming Up” L The inside of the unit is cold. Let the unit warm up. Wait for a while.
Display Cause & Solution