Filter
Top Products
9. Programmable Features
69
Activating the Distinctive
Ring feature
{#}{4}{3}{0}
{0} “Off” (default)
{1} “On”
Note:
L This feature may not be available depending on feature #114 setting (page
3).
See page 61 for details.
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{4}{3}{1}
{1} “A”
{2} “B”
{3} “C”
{4} “D”
{5} “B-D” (default)
Note:
L This feature may not be available depending on feature #114 setting (page
3).
See page 61 for details.
Setting auto reduction
feature
{#}{4}{3}{2}
To receive a fax document that is longer than your recording paper.
{0} “Off”: The unit will print received documents at their original size.
{1} “On” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{0} “Off”
{1} “On” (default)
1. {Menu} i {#}{4}{3}{4}
2. Press {1} to select “On”. i {Set}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
4. {Set} i {Menu}
Changing the silent fax
recognition ring count
{#}{4}{3}{6}
To change the number of times the unit rings while in TEL/FAX mode.
{3} “3” (default)
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 52 for details.
Feature/Code Selection