Filter
Top Products
136
Chapter 5 Internet Fax
Settings for Inbound Routing
To use the inbound routing feature, program the following parameters to meet the type of routing in
Function Parameters (Fax/Email Settings>Fax Parameters):
zFor more operational details, refer to Fax/Email Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
Routing type Explanation Function Parameters
Routing by sub-
addressing
Set this parameter to perform an ITU-T sub-address
query within its auto dialer, and to route the received
document(s) to corresponding stations Email
Address(s) or telephone number(s).
Set “152 Sub-Addr
Routing” to “Valid”
Routing by the numeric ID
of a sending fax station
Set this parameter to perform a Numeric ID (TSI frame
information) query within its auto dialer, and to route
the received document(s) to the corresponding
stations Email Address(s) or telephone number(s).
Set “153 TSI Routing” to
“Valid”
To set the From field Use this parameter to select the type if email header to
be included in the “From” field of each routed faxes.
Originator (Origi):
The originating fax machine’s TSI will appear in the
“From” field of the routed email.
Relay Station (Rly Stn):
The routing station’s email address will appear in the
“From” field of the routed email.
Program “154 Route
Header FMT”
To program printout of
received documents
Select whether to print all documents received on this
machine (Always), or print them only if inbound routing
fails (Inc Only).
Program “155 Print
Routed Doc”