Filter
Top Products
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 101
Setting [SDI LINK]
(Only for PT-DZ13KU, PT-DS12KU)
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SDI LINK].
4) Press qw to switch the item.
[SINGLE LINK] Sets SDI1 input and SDI2 input to single link.
[DUAL LINK] Sets SDI1 input and SDI2 input to dual link.
Setting [SIGNAL LEVEL]
Select the amplitude of the signal to input.
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SIGNAL LEVEL].
4) Press qw to switch the item.
[64-940] Normally use this setting.
[4-1019] Select when gray is displayed as black.
Setting [BIT DEPTH]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [BIT DEPTH].
4) Press qw to switch the item.
[AUTO] Automatically select 12 bits or 10 bits.
[12-bit] Fix to 12 bits.
[10-bit] Fix to 10 bits.
Setting [3G-SDI MAPPING]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [3G-SDI MAPPING].
4) Press qw to switch the item.
[AUTO] Automatically select level A or level B.
[LEVEL A] Fix to level A.
[LEVEL B] Fix to level B.
Note
f Does not operate during SD-SDI or HD-SDI input.