Filter
Top Products
Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 93
Note
f When set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL], 3D images
are not displayed in [3D SIMUL INPUT SETTING]. In [AUTO], however, this only occurs when 3D format can be recognized.
f This may not function properly for some connected external devices.
[LEFT/RIGHT SWAP]
Display images by inverting the timing of horizontal image switching. Change the settings when there is something wrong with the 3D image
being viewed.
1) Press as to select [LEFT/RIGHT SWAP].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL] Do not change the [NORMAL] setting if the 3D images are displayed correctly.
[SWAPPED] Select this when left and right 3D images are swapped to be displayed.
Note
f This is disabled when [3D SYSTEM SETTING] is set to other than [SINGLE].
[3D COLOR MATCHING]
Switches the color matching correction data applied to the displayed image.
1) Press as to select [3D COLOR MATCHING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[SHARED 2D/3D] 2D signals and 3D signals use the same correction data.
[SEPARATE 2D/3D] 2D signals and 3D signals use different correction data.
Note
f Switch the setting of [COLOR MATCHING] (x page 96) while inputting the signal to be adjusted.
[3D PICTURE BALANCE]
Correct a shift when the brightness or color differ in the right eye and left eye images.
1) Press as to select [3D PICTURE BALANCE].
2) Press the <ENTER> button.
f The [3D PICTURE BALANCE] screen is displayed.
3) Press as to select an item, and press qw to adjust the setting.
f Correct the setting value parts of the right eye image based on the left eye image.
f For [3D WAVEFORM MONITOR], the left eye and right eye images are divided and displayed in a waveform on the left and right.
[CONTRAST] Adjusts the contrast of the colors.
[WHITE BALANCE HIGH
RED]
Adjusts the high red white balance.
[WHITE BALANCE HIGH
GREEN]
Adjusts the high green white balance.
[WHITE BALANCE HIGH
BLUE]
Adjusts the high blue white balance.
[BRIGHTNESS] Adjusts the dark (black) part of the projected image.
[WHITE BALANCE LOW RED] Adjusts the low red white balance.
[WHITE BALANCE LOW
GREEN]
Adjusts the low green white balance.
[WHITE BALANCE LOW
BLUE]
Adjusts the low blue white balance.
[COLOR] Adjusts the color saturation of the projected image.
[TINT] Adjusts the skin tone in the projected image.
[CLOCK PHASE] Adjusts when the screen ickers or outline blurs.