Filter
Top Products
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 137
Name and function of network function parts
3
2
1
1 LAN LINK/ACT lamp (green)
Lights on when connected.
Flashes when transmitting/receiving data.
2 <LAN> terminal (10Base-T/100Base-TX)
Used to connect the LAN cable here.
3 LAN10/100 lamp (yellow)
Lights on when connected to the 100Base-TX.
Accessing from the web browser
1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.
3) Enter the user name and the password.
f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower
case).
4) Click OK.
f The [Projector status] page is displayed.