Filter
Top Products
Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 89
[FRAME LOCK]
(Only for PT-DZ13KU, PT-DS12KU, PT-DZ10KU)
Set this to view 3D display when the vertical scanning frequency of the signal is 25 Hz, 50 Hz, and 100 Hz.
1) Press as to select [FRAME LOCK].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Decreases the ickering of the display.
[ON] Synchronizes the display to the vertical scanning frequency of the input signal.
Note
f [FRAME LOCK] is not displayed when the vertical scanning frequency of a signal other than the above is input or 2D images are displayed.
f The screen may icker when [FRAME LOCK] is set to [ON].
f The display may look discontinuous when [FRAME LOCK] is set to [OFF].
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not using the whole display area.
1) Press as to select [RASTER POSITION].
2) Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
3) Press asqw to adjust the position.