Filter
Top Products
Chapter 6 Appendix — Specications
182 - ENGLISH
r Terminal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC x 1))
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD TTL high impedance, automatic positive/negative
polarity compatible
VD TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal 1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal 1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
<VIDEO IN> terminal 1 set, BNC 1.0 V [p-p] 75 Ω
<SDI IN 1> terminal (Only for
PT-DZ13KU, PT-DS12KU)
<SDI IN> terminal (Only for
PT-DZ10KU)
1 set (BNC)
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI
(LINK-A) signal
*1
SMPTE ST 372 compliant
<SDI IN 2> terminal
(Only for PT-DZ13KU,
PT-DS12KU)
1 set (BNC)
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
Dual link HD-SDI
(LINK-B) signal
SMPTE ST 372 compliant
<3D SYNC 1 IN/OUT> terminal
(Only for PT-DZ13KU,
PT-DS12KU, PT-DW11KU)
1 set (BNC)
During input setting TTL high impedance
During output setting TTL output: Maximum 10 mA
<3D SYNC 2 OUT> terminal
(Only for PT-DZ13KU,
PT-DS12KU, PT-DW11KU)
1 set (BNC)
TTL output: Maximum 10 mA
<SERIAL IN>/ <SERIAL OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack cable, 1 set each, for remote control (wired)/projector connection control
<REMOTE 2 IN> terminal 1 set, D-Sub 9 p, for contact control
<LAN> terminal 1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
*1 Only for PT-DZ13KU, PT-DS12KU
Note
f The model numbers of accessories and optional components are subject to change without prior notice.