Filter
Top Products
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 149
Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report(ERROR) ===
Projector Type : DS12K
Serial No : SW1234567
----- check system -----
MAIN CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP1 REMAIN TIME [ OK ]
LAMP2 REMAIN TIME [ OK ]
LAMP1 STATUS [ FAILED ]
LAMP2 STATUS [ FAILED ]
APERTURE(CONTRAST-SHUTTER) [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
OPTICS MODULE TEMP.SENSOR [ OK ]
AROUND LAMP TEMP.SENSOR [ OK ]
BATTERY [ OK ]
LENS MOUNTER [ OK ]
COVER OPEN [ FAILED ]
BRIGHTNESS SENSOR [ OK ]
ANGLE SENSOR [ OK ]
FILTER UNIT [ OK ]
AIR FILTER [ OK ]
AC POWER [ OK ]
(Error code 00 00 00 60 00 00 00 00 00 00 00 00 23 00 00 00)
Intake air temperature : 27 degC / 80 degF
Optics module temperature : 33 degC / 91 degF
Around lamp temperature : 32 degC / 89 degF
PROJECTOR RUNTIME 200 H
POWER ON 1 times
LAMP1 ON 1 times
LAMP1 LOW 200 H
LAMP1 MID 0 H
LAMP1 HIGH 0 H
LAMP1 REMAIN 1800 H
LAMP2 ON 1 times
LAMP2 LOW 200 H
LAMP2 MID 0 H
LAMP2 HIGH 0 H
LAMP2 REMAIN 1800 H
-------- Current status ---------
MAIN VERSION 1.00
NETWORK VERSION 1.00
SUB VERSION 1.00
LAMP STATUS LAMP1=ON LAMP2=ON
INPUT RGB1
REMOTE2 STATUS DISABLE
----- Wired Network configuration -----
DHCP Client OFF
IP address 192.168.0.8
MAC address 70:85:12:00:00:00
Fri Nov 01 16:50:14 2013
----- Memo -----