Filter
Top Products
Adjusting the position of the projected picture
The vertical position of the projected picture can be adjusted by changing the height of the projection lens using
the LENS SHIFT dial which is on top of the projector.
After determining the projection distance and the setting-up position, adjust the vertical position of the projected
picture by carrying out the following procedure.
Press the LENS SHIFT dial on top of the projector.
LENS SHIFT dial
The dial will pop up and it will be possible to turn it to
make adjustments.
If the LENS SHIFT dial is turned clockwise, the position of the projected image will be raised.
LENS SHIFT dial
Solid line: Original picture position
Dotted line: Picture position after adjustment
If the LENS SHIFT dial is turned counterclockwise, the position of the projected image will be lowered.
LENS SHIFT dial
Press the LENS SHIFT dial on top of the projector.
The dial will pop back in again and adjustment will no
longer be possible.
Lens adjustment dial
NOTE:
The height of the projection lens can be adjusted within a range of
inch (±10.1 mm). However, the
adjustment range for the position of the projected picture will vary depending on the size of the projected picture.
-14-