Filter
Top Products
Lamp unit replacement period
The lamp used as the light source must be replaced after approximately 2,800 hours of use. If the lamp is not
replaced after the cumulative usage time has passed 3,000 hours, the projector will automatically switch to
standby mode.
Screen display once cumulative usage time exceeds 2,800 hours
If you continue to use the lamp unit after 2,800 hours of total usage time have
passed, the on-screen display shown at right will appear as a reminder each
time the projector is turned on. This display will continue to appear until a button
is pressed.
Replacing the lamp unit
Notes on replacing the lamp unit
Because the lamp unit in this projector incorporates a metal halide lamp, the temperature inside the lamp rises
during use and the lamp becomes very hot. After turning off the MAIN POWER switch and disconnecting the
power cord from the wall socket, wait for the lamp to cool down before replacing the lamp unit.
Take extreme care when handling the removed lamp unit, as it contains gas under high pressure and can easily
become damaged if it is struck against hard objects or dropped.
The old lamp unit may shatter if it is handled roughly after removal.
Ask an authorized waste disposal agency to dispose of the old lamp unit.
A Phillips screwdriver is necessary for removing the lamp unit. Make sure that your hands are not slippery when
using the screwdriver.
NOTE:
The projector is not supplied with a replacement lamp unit. Please ask your dealer for details.
Lamp unit product no.: ET-LA592
CAUTION:
Do not use any lamp unit other than the one with the product number indicated above.
-41-