Panasonic PT-L592U Projector User Manual


 
Adjusting the picture position
If the picture is not correctly positioned within the display area of the screen so that part of the edge of the picture
does not appear, adjust the position of the picture.
The adjustment procedure below describes the on-screen displays when a signal is being input to the S-VIDEO IN
terminal or the VIDEO IN terminal.
Adjustment procedure <for horizontal position adjustment>
1. Press the MENU button to display the MENU screen.
2. Press the “ ” and
“ ” buttons to select “POSITION”.
3. Press the “<” and “>” buttons to display the POSITION screen.
NOTE:
If the STD (Standard) button is pressed while the POSITION screen at right is
being displayed, the letters “STD” will be displayed in yellow in the top-right
corner of the screen and all items displayed will be reset to the factory pre-
settings. Furthermore, the values and bar displays for items which have
returned to the factory pre-settings will be displayed in yellow.
4. Press the “ ” and “ ”
buttons to select “H-POSI”.
To adjust the vertical position of the picture, select “V-POSI” instead.
5. Press the “<” and “>” buttons to display the H-POSI individual adjustment screen.
6. Continue pressing the “<” and “>” buttons to adjust the H-POSI setting. The
current setting will be displayed on the screen by numerals and a bar.
The adjustment range is between 0 and 95.
Adjustment func-
tion display
Numeric adjustment
level display
<When adjusting the horizontal position (H-POSI)>
If the ">" button is
If the “<” button is
pressed, the
pressed, the
picture moves to
picture moves to
the right.
the left.
<When adjusting the vertical position (V-POSI)>
If the ">" button is
If the "<" button is
pressed, the
pressed, the picture
picture moves up.
moves down.
Bar display
NOTE:
If approximately five seconds pass without any buttons being pressed while an individual adjustment screen is
being displayed, the display will return to the POSITION screen.
Press the MENU button to return to the POSITION screen or to clear the MENU screen.
If the STD (Standard) button is pressed while one of the individual adjustment screens is being displayed, the
value and the bar display will be appeared in yellow and only the item displayed will be reset to the factory pre-
setting.
-25-