Filter
Top Products
13
Getting To Know
Your Machine
Ventilation
The machine should be installed in a well-ventilated area to minimize the ozone density in the air.
Handling
Do not turn the Power Switch Off or open the Front Cover during copying/printing.
Energy Saver Mode Notice
When using the Printer Function (USB Local and Network Connections), we recommend that you leave the Energy
Saver Mode in the initial factory default setting (Sleep mode).
(See page 92)
Key Operator Password
The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require
the Key Operator Password.
For Key Operator: When setting up this machine, please consult with your authorized Panasonic dealer, and
decide on the Key Operator Password together, then record it and keep it in a safe place for
future reference.
Dept. (DEPARTMENT) Code
Number of Copies
The maximum number of copies is up to 999 (3 digit with keypad). During the copy mode, if you input 4-8 digit
numbers, they will be interpreted as being a phone number and displayed on the LCD, then the machine will switch to
the Fax mode.
Auto Reset Timer
As the initial setting for Auto Reset Time is 1 minute, selected operation mode returns to default operation mode (Fax)
after 1 minute, if you wish to change this Auto Reset Time, set to Fax Parameter No.121. (See pages 113).
When the Department Counter function is set up, the Dept. (Department) Code input
screen is displayed on the LCD Display. A registered Department Code (1 to 8-digit) is
required to gain access to each secured function, or the secured Fax/Scanner
function(s) cannot be used. Please consult with the Key Operator regarding the
Department Code(s) for the desired function.
Procedures:
(1) Input a registered department code (1 to 8-digit).
(2) Press the SET or START Key.
INPUT DEPT. CODE
********
1 to 8-digit