Filter
Top Products
9
Getting To Know
Your Machine
Getting To Know Your Machine
Precautions
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using your machine to ensure proper and safe
operation of your machine.
This section explains the graphic symbols used in this manual.
This section also explains the graphic symbols used in this manual.
Installation and Relocation Cautions
CAUTION
!
Power and Ground Connection Cautions
WARNING
!
Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that
may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment.
Prolonged exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 48.5 lb (22 kg). If tilted, the
machine may tip-over and cause injuries.
When relocating the machine, contact your authorized Panasonic dealer.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with the
power cord attached, it can cause damage to the cord which could result in fire or electric shock.
Ensure that the plug connection is free of dust. In a damp environment, a contaminated connector can draw a
significant amount of current that can generate heat and eventually cause fire over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord is required, always use
a properly rated cord.
120 V/15 A
If you use a cord with an unspecified current rating, the machine or plug may emit smoke or become hot to the
touch externally.
Do not attempt to rework, pull, bend, chafe or otherwise damage the power cord. Do not place a heavy object
on the cord. A damaged cord can cause fire or electric shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken or insulated wires are exposed, contact your authorized Panasonic dealer for a
replacement. Using a damaged cord can cause fire or electric shocks.
WARNING:
Denotes a potential hazard that could result in serious injury or death.
CAUTION:
Denotes hazards that could result in minor injury or damage to the machine.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.