Filter
Top Products
39
Facsimile Features
To Stop the Transmission
NOTE
3. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 5551234
4. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may
deteriorate at the remote station due to its reception capability. If this occurs, re-send with
Direct Transmission or use "Fine" Resolution.
5. You can search for another name starting with the same character by scrolling with the Cursor
Keys ( / ).
• If memory overflow occurs while storing originals, the machine will stop and
the remaining originals will remain on the ADF. In the factory default setting
(Fax Parameter No. 82 (Quick Memory XMT)) is set to "Valid", the machine
will transmit the stored documents automatically when transmitting to one
station. If Fax Parameter No. 82 is set to "Invalid" and transmitting to one
station, the machine will change the transmission mode from Memory to
Direct XMT automatically when it detects that memory overflow will occur.
If set to "Valid" and transmitting to multiple stations, the machine will show
"MEMORY FULL" and prompts you whether to transmit the successfully
stored documents or to cancel the transmission.
Press "YES" to cancel or press "NO" to transmit. If no action is taken
within 10 seconds, the machine will start transmitting the stored documents.
If memory overflows while storing 1st page, use Direct Transmission.
• An Information Code will be displayed if the transmission has failed or there
was no answer at the receiving side after the last automatic redial.
The document stored for the transmission will be erased from the memory
automatically and the information code is printed for the transmission on the
Communication Journal (COMM. JOURNAL).
If you need to retain the incomplete documents even after the last redial,
change the Fax Parameter No. 31 (INC. FILE SAVE) to "Valid" in advance.
(See page 111)
To retry the incomplete documents, refer to page 82.
1 2
3a
3b
3c
3d
4
Select the desired Transmission
setting.
(See page 23)
or
Quick Name Search Dialing
One-Touch/ABBR. Dialing)
Manual Number Dialing
Directory Search Dialing
2
and/or
(
and/or
You can send the same
document(s) to multiple stations.
Multiple stations can be selected
by any combination of the Steps 3a
(3b), 3c and/or 3d, and then
pressing .
START
The document(s) is stored into
memory with a file number. Then
starts sending the document(s).
21
COMMUNICATION STOP?
1:YES 2:NO
3
PRINT COMM. JOURNAL?
1:YES 2:NO
Print Communication
Journal and stop the
transmission.
Stop the transmission.
1
2
4
Remove the
document(s) from
the ADF.
TONE
PAUSE
TONE