Filter
Top Products
20
Getting To Know Your Machine
Connecting the Cables
Power Cord (Included)
Plug one end of the Telephone
Line Cable into the telephone
jack supplied by the telephone
company and the other end into
the LINE jack on the back of
the machine.
After connecting all Cables and
Power Cord, turn the Power Switch
on the back of the machine
to the ON ( I ) position.
Telephone Line Jack
Power Switch
(Optional G3 Communication Port Kit (UE-407026) is required.)
Optional 2nd Telephone Line Jack
See Operating Instructions
(For Document Management
System and Printer)
USB Port
Optional Handset Kit
(UE-403171)
Optional Telephone Handset Jack
Connect the Telephone Line Cable from the
Optional Handset Kit into the HANDSET
jack on the back of the machine.
External Telephone Jack
You can connect an additional standard
single line telephone to the machine.
To connect a telephone,
remove the protective tab on the TEL jack.
RJ-11C
Telephone Jack
LAN Connection Jack
(10BASE-T/100BASE-TX)
LAN Cable
(10BASE-T/100BASE-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
LINK Lamp
Illuminates when connected
to the LAN.
Lamp will not turn ON if LAN
cable is defective (contains
breaks).
ACTIVITY Lamp
Blinks when there is data
traffic on the LAN.
Ethernet LAN
(10BASE-T/100BASE-TX
Cable Not included)
10BASE-T/100BASE-TX Ethernet Hub
(Refer to the Dialing Method. See
page 94.)