Filter
Top Products
1-7
Introduction
4. Normal Preset Press to return to the meter settings you use most often.
5. Custom Presets Press to select from a list of up to 10 custom meter settings.
Each preset can include a name, a postage value, an ad,
and an account number.
6. Date/Ad/Insc. Press to change the date or choose the ad you want to print.
7. Account Press to see and select from a list of accounts. The meter
charges the postage used to the account you select and
stores the information for report printing. The meter is
supplied with the accounting feature turned off. If required, it
can be turned on as described on page 3-20.
8. Tape Press to print a tape strip. Apply tape strips to oversize
envelopes and packages (DM300 system only).
9. Acct/Batch Press to see the total postage used and number of pieces
Totals charged to an account. If the meter’s accounting feature is
turned off, the display shows the total postage used and
number of mailpieces processed since the batch register was
last reset.
10. Meter ID Press to see your meter’s serial number, Postage by Phone
account number, cycle counts and software versions.
11. Refill Press this button to add postage to your meter.
12. Options
(no)
Press to check print quality, print reports or set your meter
up. Also press to answer “No” to a display prompt.
13. Enter
(yes)
Press to confirm an operation or answer “Yes” to a display
prompt.
14. Funds Press to see the postage funds available, funds used and
number of mailpieces processed by the meter. You can also
print a funds (register) report.
15. Alpha Keypad Use this to type in account names and other information
when you set your meter up.
16. Numeric Keypad Use this to key in postage values, refill amounts and other
numerical information. Press CE/C to clear an entry or move
back through the setup menus to exit them.