Filter
Top Products
3-11
Configuration
Default Refill Amount
What is it? When you press the Refill key, the meter display
automatically shows a suggested refill amount. This value
is factory set at £200.00. You can change it to your own
usual refill amount (the “default” value) using this function.
Where is it? In the Refill Setup Menu.
Select: Options > Setup Menu > Basic Settings > Refill
Setup > Default Refill Amount
Action… Key in the postage refill amount you usually add to the
meter. This is the normal or “default” value. You can enter a
value up to £9,950. Make sure the value you enter is a
multiple of £50, as this is a requirement of the Postage by
Phone system.
Press Enter. The display shows the value you entered and
returns to the Refill Setup Menu.
Refill Mode
What is it? Allows you to set your meter to refill automatically by
modem or in exceptional circumstances, manually via the
keypad.
Where is it? In the Refill Setup Menu.
Select: Options > Setup Menu > Basic Settings > Refill
Setup > Refill Mode
Action… Under normal circumstances, with your meter connected to
an analogue phone line, select Auto-Refill.
In exceptional circumstances, such as if there is a problem
with the auto-refill process, select Contingency Refill.
NOTE: It is essential that you normally use the auto-refill
mode. Only use the contingency refill if there is a problem
with the auto-refill process.
Press Enter. The display shows your selection and goes
back to the Refill Setup Menu.