Filter
Top Products
48 J693
Step Operator Action Displayed Message Comment
6
Press the
key.
Use the
key to
scroll to ‘Sensor
Calibration’.
Press the
key.
See Section
4.1.1 for
details.
Press the
key to
abort this
procedure.
7
Use the
key
to
scroll to ‘Advanced Entry’.
Press the
key.
See Section
4.1.1 for
details.
8
Press the
key.
See Section
4.1.1.
9
Place the label under the
Sensor Eye Mark and lower
the printhead.
Using the key
increment the Gain
Number. Press the
key to select the new setting
and then record the sensor
reading (the ‘yyy’ value).
Repeat this process for each
of the 16 Gain Numbers.
These are the Label Values.
-OR-
Ensure that an
unmarked label
area (without
pre-printing) is
in the Media
Sensor.
(Continued next page)