Filter
Top Products
IDL series User Guide
116
Output:
PortId : 1
DefaultPriority : 1 NumTrafficClass : 3
DefaultSVPriority : 1
Output field:
Field Description
PortId
Port number of the port for which this entry contains bridge
management information.
DefaultPriority
The default ingress User Priority which can be configured
by the user. The default value of this attribute can be 0 or 0
depending on interface over which the bridge port is
created. The default value is 0 for bridge port created over
ethernet or aggregator interface. And the default value is 0
if the interface over which the bridge port has been created
is one of EOA, PPPoE and IPoE.
NumTrafficClass
The number of egress traffic classes supported on this
port. It depends on whether bridge port is over EOA, in
which case, the max number of queues is value of
maxnumeoaprioQs in gsvSystemSizingGroup and default
value is also value of maxnumeoaprioQs in nbsize or over
Ethernet / aggregated interface, in which case, the max
number of queues is value of MaxNumEthPrioQs in nbsize
and default value is also value of MaxNumEthPrioQs in
nbsize. It is modifiable only when the bridge port is in
disabled state.
DefaultSVPriority
Not supported
References:
Bridge port commands