Filter
Top Products
IP DSLAM
627
contains information about the routes in the system. Each RID
identifies a flow and defines route related information for that
flow. The RID defines a flow based on the VLAN Id. The
database can be of 2 types, IRD( Independent Routing
Database) where there are more than one RIDs in the system
and each RID defines separate routes in context of itself. If
VlanId <X> and RID <X> have been created and the routing
database is configured for IRD, than routes in RID <X> shall
define flow for packets coming on VLAN Id <X>. The other
mode for the database is SRD( Shared Routing Database)
where there is a single RID in the system and all flows map to
this RID. This RID has to be explicitly created and no more than
1 RID can be created in the system in this mode. Flows for all
created VLANs shall map to this RID for routing.
5.25.9 System Stats Commands
5.25.9.1 Get system stats
Description:
Use this command to view System Statistics.
Command Syntax:
get system stats
5.25.9.2 Reset system stats
Description:
Use this command to reset System Statistics.
Command Syntax:
reset system stats
Example:
$ get system stats
Output :
Verbose Mode On
Verbose Mode On
CPE Ucast Addr Count : 10 DnLink Ucast Addr Count : 80
NET Ucast Addr Count : 20 CPE Learn Entry Discards : 90