Filter
Top Products
IP DSLAM
373
consistent with the mentioned valuetype of generic list.
Value Type
This field specifies value type of the entry. The value type for all entries on an
interface should be same. Value type should match value type of subrule field
for which comparsion type is ingenlist or notingenlist incase the rule containing
the subrule is attached on the same interface. It should be 'U32' in case a rule
containing IP subrule or Generic subrule with cmptype as InGenList or
NotInGenList is attached on same interface. Currently only 'U32' value is
supported.
5.13.17 Filter namedlist genentry Commands
5.13.17.1 Get filter namedlist genentry
Description:
Use this command to get.
Command Syntax:
get filter namedlist genentry [listid <listid-val>] [value <value-val>]
5.13.17.2 Create filter namedlist genentry
Description:
Use this command to create.
Command Syntax:
create filter namedlist genentry listid <listid-val> value value-val>] [valueto
<valueto-val>]
5.13.17.3 Delete filter namedlist genentry
Description:
Use this command to delete.
Command Syntax:
delete filter namedlist genentry listid <listid-val> value <value-val>
Parameter:
Name Description
listid <listid-val>
This field stores the list identifier value. There must be a row indexed on
the same id in the Generic Filter Named List Table.
Type: Create -- Mandatory