Filter
Top Products
IDL series User Guide
646
vc <vc-val>
Name of the VC to be part of aggregation.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 101 -206
dnstrmpriolist 0 | 1 | 2 |
3 | 4 | 5 | 6 | 7 | none
This field specifies the downstream priorities with
which the specified VC interface shall be
associated under a VC Aggregation interface.
This field is used for demultiplexing downstream
traffic. A VC can be mapped to multiple priorities.
But not two VCs can be mapped to same priority.
Value None has special significance. It specifies
that this VC is part of VC Aggregation interface
but no priority is mapped to it.
Type: Create -- Optional
Modify -- Optional
Default value: 8
upstrmdefprio
<upstrmdefprio-val>
Priority parameter to be used for tagging the
untagged upstream traffic coming on a VC.
Regeneration of priority at bridge level will be
done on the basis of this priority.If value None is
specified, then bridge port's defprio will be used
for tagging the untagged packets
Type: Create -- Optional
Modify -- Optional
Valid values: 0 -8
Default value: 8
upstrmregenprio
<upstrmregenprio-val>
Priority parameter to be used for retagging the
tagged upstream traffic coming on a
VC.Regeneration of priority at bridge level will be
done on the basis of this priority.If value None is
specified, then bridge port's priority regeneration
map will be used.
Type: Create -- Optional
Modify -- Optional
Valid values: 0 - 8
Default value: 8