Filter
Top Products
IDL series User Guide
466
Out Discards
The number of outbound packets chosen to be discarded even though there
were no errors.
In Errors
The number of inbound packets, which were not delivered to upper layers
because of errors.
Out Errors
The number of outbound packets chosen to be discarded because there were
errors.
In Ucast Pkts
The number of unicast packets delivered to a higher layer protocol.
Out Ucast Pkts
The total number of packets requested to be sent to unicast addresses, by
upper layer protocols.
HC In Octets
The total number of octets received on the interface, including framing
characters. This object is a 64-bit version of ifInOctets. Discontinuities in the
value of this counter can occur at re-initialization of the management system,
and at other times, as indicated by the value of ifCounterDiscontinuityTime.
Valid for eth-*.
HC OutOctets
The total number of octets transmitted out of the interface, including framing
characters. This object is a 64-bit version of ifOutOctets. Discontinuities in
the value of this counter can occur at re-initialization of the management
system, and at other times, as indicated by the value of
ifCounterDiscontinuityTime. Valid for eth-*.
In Mcast Pkts
The number of multicast packets delivered to a higher layer protocol.
Out Mcast Pkts
The total number of packets requested to be sent to multicast addresses, by
upper layer protocols.
In Bcast Pkts
The number of broadcast packets delivered to a higher layer protocol.
Out Bcast Pkts
The total number of packets requested to be sent to broadcast addresses, by
upper layer protocols.
LinkUpDnTrapEnable
Indicates whether linkUp/ linkDown traps should be generated for this
interface.
Promiscous Mode
This object has a value of false if this interface only accepts packets/frames
that are addressed to this station. This object has a value of true when the
station accepts all packets/frames transmitted on the media. The value true is
legal only for Ethernet interfaces. The value of PromiscuousMode does not
affect the reception of broadcast and multicast packets/frames by the
interface.
Connector Present
This indicates whether the interface sublayer has a physical connector or not.
This is true only for physical Ethernet interfaces.
CounterDiscontTime The value of sysUpTime on the most recent occasion, at which any one or
more of this interface's counters suffered a discontinuity.