Filter
Top Products
IP DSLAM
457
Type: Modify -- Optional
Valid values: 0 - 7
maxgrpallowed
<maxgrpallowed-val>
This parameter controls the no. of simultaneous channels that
can be received by this port
Type: Modify -- Optional
Valid values: 0 - 256
querierstatus Enable |
Disable
This parameter controls whether a port can become querier
Type: Modify -- Optional
mcastvlanstatus Enable |
Disable
This parameter controls the status of Multicast Vlan option on a
port
Type: Modify -- Optional
nomatchaction Drop |
Transparentlyforward |
Learn
This parameter specifies the action to be taken when multicast
vlan can not be determined for a port where multicast vlan option
is enabled Possible action values will be :Drop, Transparently
forward, and Learn based on ingress vlan
Type: Modify -- Optional
Example:
$ get igmpsnoop port info portid 6
Output:
Port Index : 6
Port Igmp Snoop Status : Enable Leave Mode : Normal
IGMP PacketsPrio:2MaxGroupAllowed:2'
Querier Status : Enable McastVlan Status : Enable
No McastVlan Match Action : Learn
Output field:
Field Description
Port Index
This parameter specifies a bridge port for which IGMP Snooping
needs to be enabled or disabled.
Port Igmp Snoop
Status
This parameter specifies whether IGMP Snooping is to be enabled
on the port.
Leave Mode
This parameter specifies the Igmp Snooping Leave message
processing mode for the port. If the mode is set to 'Normal', the
Leave message is forwarded to the Querier. Then, based on the
Query received from Querier, the Leave processing is triggered. If
the mode is set to 'Fast', the port is immediately deleted from that
multicast group on Leave message reception and then the Leave
message is forwarded. The mode should be set to 'Fast' for a port