Filter
Top Products
IDL series User Guide
158
Output Fields:
Field Description
IfName
Interface Index of the ATM port, on which this VC is getting configured.
VPI
This is the Virtual Circuit Identifier.
VCI
This is the Virtual Port Identifier.
LB Type
This specifies the loop back type used. It may be:e2e or segment.
OAM Location Id
This defines the loopback site, which will loopback the cell.
OAM LB Result
This specifies the result of the loop back test. It may be Result
Unavailable, Seg Succeeded, Seg Failed, E2e Succeeded, E2e Failed,
Test Aborted, or Test In Progress.
References:
z atm vc related commands.
z atm port and statistics related commands.
5.5.4 ATM Port Commands
5.5.4.1 Get atm port
Description:
Use this command to get.
Command Syntax:
get atm port [ifname <interface-name>]
5.5.4.2 Create atm port
Description:
Use this command to create.
Command Syntax:
create atm port ifname <interface-name> lowif <lowif-val> [ maxvc <maxvc-val> ]
[ maxvpibits <maxvpibits-val> ] [ maxvcibits <maxvcibits-val> ] [ oamsrc
<oamsrc-val> ] [ orl <orl-val> ] [ trfclassprofileid <trfclassprofileid-val> ]
[ profilename <profilename-val> ] [ ctlpktinstid <ctlpktinstid-val> ]
[ atmtransporttype cell | packet ] [ mirrormode data | mirror ] [ enable |
disable ]