Filter
Top Products
IP DSLAM
481
RoutingStatus
This specifies if the IP Routing Lookup has to be done for
this interface. By default, for the downstream traffic
destined for IPOE interface, IP lookup is done based on
the downstream route configured for the IPOE interface.If
iproutingstatus is disabled, layer 2 lookup shall be used
instead, for forwarding the downstream traffic for this IPOE
interface.
Admin Status
Administrative status of the interface.
Oper Status
Operational status of the interface.
5.16.5 Rid static Commands
5.16.5.1 Create rid static
Description:
Use this command to create.
Command Syntax:
create rid static rid <rid-val>
5.16.5.2 Delete rid static
Description:
Use this command to delete.
Command Syntax:
delete rid static rid <rid-val>
Parameters:
Name Description
rid <rid-val>
RID refers to the Routing Information Database. This
database contains information about the routes in the
system. Each RID identifies a flow and defines route
related information for that flow. The RID defines a flow
based on the VLAN Id. The database can be of 2 types,
IRD (Independent Routing Database) where there are
more than one RIDs in the system and each RID defines
separate routes in context of itself. If VlanId <X> and RID
<X> have been created and the routing database is
configured for IRD, than routes in RID <X> shall define