IP DSLAM
73
4.1.2.1 Contents of FD.cfg
Use WordPad or Word to open FD.cfg. (See the following figure)
The default configuration in FD.cfg summarized as follows.
z Default IP: 192.168.100.111
z SNTP: disable
z RFC-1483 Bridge mode only
z One PVC (8/81) for each ADSL port
z Bridge port numbering 1 to 48 mapping to PVC 8/81 for ADSL port1 to port 48/24
z VLAN feature Disable
z Eth0 enable (for uplink), its bridge port number is 385
z Eth1 disable (for downlink)
z MGMT interface disable
Note:
To view the detailed contents, please refer to the Appendix A.