Filter
Top Products
IP DSLAM
527
Parameters:
Name Description
portid <portid-val>
Bridge Port Identifier
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 194
vlan <vlan-val>
VLAN identifier. In case of stacked mode this is virtual
VLAN
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 4095
profileid
<profileid-val>
PIA profile identifier. This shall be used for this PIA
Instance
Type: Create -- Mandatory
Modify -- Optional
Valid values: 1 - 4
status enable | disable
Used to enable or disable PPPOE intermmediate agent for
this instance
Type: Create -- Optional
Modify -- Optional
Default value: disable
vsatag disable |
AddAlways |
AddIfNotExists
This specifies the action to be performed on VSA Tag on
receiving PPPoE discovery packets for this instance. If
disabled PIA will not add VSA tag to the PPPoE packets. If
AddAlways is set then VSA tag is always added. If
AddIfNotExists is set then VSA tag is added only if the
received packet does not contain the VSA tag.
Type: Create -- Optional
Modify -- Optional
Default value: AddAlways
configsuboptionbitm
ask aci | PortId | None |
None
This bitmask is used to indicate which all parameters are
configured for this instance. Parameter bit set in this
bitmask will overwrite the automatically derived values of
agent circuit Id and/or port id by the values configured in
this MO.
Type: Create -- Optional