Filter
Top Products
10 Unpack and Assemble
17. Remove the packing tape from the rewinder dancer arm and move it into the up
(starting) position.
Warning: To prevent serious injury you must bolt the CX1200 to a table or bench. Use the included
lag bolts and predrilled holes in the base.
18. Locate the power converters and the printer power cord. Connect power to the printer and
switch on the power. Connect the power to the back of the rewinder and unwinder. Switch on
the power.
Congratulations! Your CX1200 is setup!
4X
I
O
Figure 2-17.
Figure 2-18.
!
ON
OFF
TOC
INDEX