Filter
Top Products
18 Create a Print File
4. Step and Repeat per page are automatically calculated based on the size set in step 3.
Alternately you may increase or decrease the size of the labels to affect the numbers of
Rows or Columns per page.
5. Adjust the spacing between labels to affect the number of rows and columns or match a specific
die size. You may also adjust the left offset of the labels by unchecking the center horizontally
and adjusting the value accordingly.
Tip: If you are using XY cutter you
may be able to fit more images on the
page by rotating the image. Select
Landscape to rotate the image.
Important Note: Vertical and horizontal
spacing does NOT factor in a bleed. It
assumes the cut label size will be the same
as imported image size. For example if your
spacing between labels should be 1/8 inch
but you have a 1/16 bleed build into each
label your spacing would be zero for both
horizontal and vertical.
TOC
INDEX