Filter
Top Products
B–11
Host I/O Interfaces
RS–232 Serial Interface Configuration
The printer is configured for the RS–232 serial interface via the “Host Interface”
menu as described in Chapter 3, Configuring the Printer. The following interface
configuration parameters may be modified to meet specific application
requirements:
Host Protocol None
Baud Rate 9600
Data Word Length 8 Data Bits
Stop Bits 1 Bits
Parity None
Data Terminal Ready Function On/Offline and Buffer
Request to Send Function On/Offline and Buffer
Data Terminal Ready Polarity Normal
Request To Send Polarity Normal
Buffer Size 8192 Bytes
Number of Buffers 2
FIFO Trigger 14 Bytes
Diagnostics None
NOTE: Only the factory default setting is shown above. Refer to the
Configuring the Printer chapter for additional options.