Filter
Top Products
2–17Setting Up the Printer
Install the OPC Drum Unit
CAUTION
The OPC drum unit is light sensitive. Install it within five minutes.
When removing the drum unit from the foil bag, do not touch the
surface of the drum unit. Fingerprints and scratches can damage the
drum surface and cause poor print quality. Do not rotate the drum unit
manually. Forced rotation will cause an incorrect count for the life of the
drum unit and may cause poor print quality.
Refer to Figure 2–10 and perform these steps:
1. Remove the OPC drum unit from its foil bag.
NOTE: Save the foil bag and insert the OPC drum unit into the bag
whenever the printer cover is open for more than five minutes.
2. Insert the drum unit behind the developer unit. The OPC drum unit will
slide into place easily.
NOTE: The drum unit does not lock into place; it rests behind the developer
unit.
3. Close the printer cover.
OPC Drum Unit
Figure 2–10. Installing the OPC Drum Unit