Filter
Top Products
Index–5
Printing Configuration Parameters, 3–13
Protect Configurations, 3–25
PTX–Setup Option, 3–31
R
Reprint on Fault, 3–18
Requirements
power, 2–3
site, 2–4
Resistors, Termination, B–8
RS–232 Serial, 3–39
RS–422 Input, 3–43
RS–422 Serial, 3–39
RTS Function, 3–41, 3–42
S
Safety Precautions, 2–2
Save Configuration, 3–24
Saving Configuration Parameters, 3–7
Second Disk Drive, 1–6
Serial Interface (RS–232), B–9
Serial Interface (RS–422), B–12
Serial Interface Menu
baud rate, 3–40
buffer size, 3–42
data bits, 3–40
diagnostic, 3–42
DTR function, 3–41
DTR polarity, 3–41
FIFO trigger, 3–42
host protocol, 3–40
number of buffers, 3–42
parity, 3–41
RS–422 input, 3–43
RTS function, 3–41
RTS polarity, 3–42
series 1 delay, 3–43
series 1 idle, 3–43
series 1 polarity, 3–42
stop bits, 3–41
Series 1 Delay, 3–43
Series 1 Idle, 3–43
Series 1 Poll, 3–42
Setup, initial, 2–7
Site Requirements, 2–4
Space on Disk, D–1
Specifications, printer, A–1
Starter Toner, 2–11
Stop Bits, 3–41
Strobe Filter, 3–35, 3–38
Strobe Polarity, 3–34, 3–37
System Info Menu, system memory, 3–48
System Information Menu, 3–48
System Memory, 3–48
T
Termination Resistors, B–8
Test, running the test print, 4–3
Test Print, 3–22
Trailing Edge, 3–35, 3–38
Transporting
long distance, 2–25
short distance, 2–24
Transporting Printer, 2–24
Troubleshooting, 4–5
interference, 2–23