Filter
Top Products
3–48 Configuring the Printer
System Information Menu
System Info
System
Memory
Press UP, DOWN, NEXT
, and PREV
to view options.
Press ENTER to select an option.
Press ON LINE at any time to exit
configuration (will save changes until
printer is turned of
f).
* = Factory Default
Figure 3–13. Font Memory Menu
System Memory
This menu item displays the amount of RAM that is available on the
motherboard. There are 8 megabytes of RAM factory–installed on the
motherboard.
Depending on the paper length selection, the following memory requirements
must be met to allow the printer to run at optimum speed:
Paper Length Memory Fonts/Forms Pages
3.0 to 14.0 inches (standard) 8 Megabytes 3 Megabytes 4 Megabytes
14.1 to 30.0 inches 12 Megabytes 3 Megabytes 8 Megabytes
30.1 to 33.00 inches 16 Megabytes 4 Megabytes 11 Megabytes
NOTE: Beyond 16 Megabytes of additional memory, all added memory is
used for fonts/forms storage.