Filter
Top Products
Chapter 2 RFID CONTROL Menu
30
Admin User Menu Items
To see these menu items, set Admin User to Enable in the
PRINTER CONTROL menu. (Refer to the
User’s Manual
.)
IMPORTANT
Admin User menu items should only be used by authorized
personnel.
Read Tag
IMPORTANT
This menu item does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler to
receive an accurate reading.
This menu item reads the tag in range of the internal RFID coupler
and reports the tag data to the debug port and momentarily displays
it on the control panel’s LCD. It is primarily intended for
development verification by checking that the system is working.
Read Tag&Eject
IMPORTANT
This menu item does not position the RFID tag over the
coupler. Make sure to position the tag over the coupler to
receive an accurate reading.
The menu item works exactly the same as Read Tag (above),
except that after the printer reads the tag, it feeds the label to the
next top-of-form.
PreErase Class 0+
IMPORTANT
If you set PreErase Class 0+ to Disable, no erase cycle will
occur and pre-programmed tags are not guaranteed to
program correctly.
This menu item enables or disables an automatic erase cycle
forced on a Class 0+ tag before the tag is programmed. If an error
occurs during the initial encoding, the ensuing retries will also
include an automatic erase cycle.