Filter
Top Products
Chapter 2 RFID PGL Commands
40
banks do not accept incremental data because the ACS
memory bank contains passcodes for LOCK and UNLOCK
operations, and the KIL memory bank contains a killcode to
kill a tag. Incremental data do not apply to passcodes or
killcodes.
10. When LOCK<DFn> and UNLOCK<DFn> are used in
the same form, the dynamic format <DFn> needs to be a
different dynamic number for LOCK and UNLOCK since it
is designed where a unique dynamic number can be linked
to only one object type. In this case, LOCK is linked to
RFWTAG object and UNLOCK is linked to RFRTAG
option. Although both options use the same passcode, the
dynamic format needs to be in a different dynamic number
in the same form.
11. The NOMOTION parameter of the CREATE command
is used primarily in RFID applications. Refer to “CREATE”
in the
IGP/PGL Programmer’s Reference Manual
.
Example 1
The following example programs an SGTIN–64 value
into the RFID tag that is embedded in a 4x6 smart
label. Assume that the SGTIN–64 value is provided as
a single number.
~CREATE;SGTIN–64;432
RFWTAG;64
64;H;*87D0034567ABCDEF* /EPC number
STOP
END
~EXECUTE;SGTIN–64;1
~NORMAL
Example 2
Same as Example 1, except the EPC number is broken
into its component parts. Assume that the SGTIN–64
value has the Header = 2d, Filter Value = 5d, EPC
Manager Index = 15383d, Object Class = 703710d or
0xABCDE, and the Serial Number = 0123456d.
~CREATE;SGTIN–64;432
RFWTAG;64
2;B;*10* /Header