Filter
Top Products
71
3 MP2 RFID
New Coupler System
The MP2 RFID has a new coupler design that supports a greater
variety of tag types. The new MP2 coupler is moveable laterally via
a coupler handle centered under the media guard (next to the gap
sensor). See figure on page 72.
The coupler has four positions on a four inch printer and five
positions on a six inch printer. These positions are color coded on
the front of the media guard. The possible positions moving from
inboard (nearest the electronic bay) to outboard (nearest the
window) are as follows:
Yellow: 1st Position (furthest inboard)
Orange: 2nd Position
Red: 3rd Position
Blue: 4th Position (furthest outboard on a 4 inch printer)
Green: 5th Position (this uses a second coupler position indicator
available on six inch printers only)
Once you select a tag type from the front panel, a message will
display above the selected tag type:
Ant Pos
x
where
x
is Yellow, Orange, Red, Blue, or Green.