Filter
Top Products
1–6 Introduction
Media Selection
Since there are two modes of operation, there are two kinds of thermal media:
• Direct thermal media
• Thermal transfer media
Direct thermal media is paper coated with special chemicals that act as an
accelerator, acceptor dye and binder. During direct thermal mode, the heat from
the thermal printhead contacts the paper and causes a chemical reaction to take
place.
There is a wide range of Printronix thermal transfer media available, such as film
or synthetic paper substitutes that are excellent in their ability to transfer an
image (print quality) and others in scratch resistance (long storage). Most of
these media options can be die-cut for easy label applications. The wide
selection of media sizes and face stocks have been tested with Printronix ribbons
for print quality and usage. Consult your Genuine Printronix Supplies Catalog or
contact the factory. Further information can be obtained by calling the Printronix
ThermaLine Help Desk at (714) 221–2488 or from the Printronix Web Page at
http://www.printronix.com.
NOTE: The term “media” used in this manual refers to all the different kinds
of paper that can be used in the printer.
Ribbons
Printronix offers a wide range of ribbons that have been specifically engineered
to enhance printing capabilities and to prevent premature printhead wear.
Therefore, it is strongly recommended that you use a Printronix Genuine Thermal
Ribbon in your printer.