Filter
Top Products
3–42 Configuring the Printer
Test Selection
This menu item is used to select the type of pattern to be used for the test
printout.
Test Count
This menu item is used to select the number of pages for the test printout. You
may select 1, 2, 5 or 10 pages, or a continuous number of pages. The default is
one page.
Start Test
Press the key to start and stop diagnostic test printing.
Printhead Test
This option is used to define and activate a printhead test. You must enable the
test selection and specify the test period.
Print Statistics
This option provides access to miscellaneous items that provide information
about printer usage.
Printer Life
This menu item displays the total number of meters printed (normalized to 300
dpi).
Head Life
This menu item displays the total number of meters printed (normalized to 300
dpi) for the printhead. Use the Reset Head Data menu item when you replace the
printhead.
System Memory
This menu provides information about system memory configuration.
• Total RAM – Total RAM in printer
•
Firmware Rev
– Firmware revision