Filter
Top Products
2–18 Setting Up the Printer
Refer to Figure 2–14
and perform the steps listed below.
1. Connect the interface cable to the appropriate printer interface
connector and to the host computer. The printer supports a variety of
standard and optional interfaces:
• Centronics-compatible parallel
• RS–232 and RS–422 serial
• Coax/Twinax (optional)
NOTE: The serial and parallel ports are both active. If data is received
simultaneously on both ports, the output may be mixed.
Parallel Port
General
Purpose
I/O Port
Serial
Port
Fan
Power Switch
AC Input
Power
Connector
Figure 2–14. Cable Connections
}
Standard